In case of direct supply from the vehicle battery assure that the connection
cable is in a position of easy access and that during the use your movements
won’t be conditioned. Predispose the connection to have easy access
to the switch. Assure that the wirings connections are connected and
well plugged. Periodically use an antioxidant to avoid the oxidation
of the contacts. In the case of multilink replace the fuse as in the
instructions of multilinks page.
Within the complete range of Klan accessories you will be able to custom
all kind of bike for the most suitable connections for your heated link
or multilink. The products of the Klan, can be attached in combination
the one with the other, among the accessories there are available the
necessary cables for such connections.K- C- Y / K- C- DOUBLE.
Remember to unplug the cable before going down from the vehicle, avoid
to tear the cable and the plugs it could compromise the integrity of
it
The connections don’t absolutely have to jeopardize the full safety
riding manoeuvres, we recommend to verify these conditions with manoeuvres
from a still position. It is recommended not to hold turned on the article
once reached the desired heat or during prolonged standstills, you will
have battery saving and you will avoid the overheating of the resistances.
Don’t ever leave turned on the articles overlapped or refolded. It is
recommended not to bring changes to the items and the wirings, not to
cut the textiles,therefore not to unstitch them and stitch them back,
in any case do not intervene and modify the product, the tampering of
the same could provoke scorching, you could compromise the integrity
and the functionality of it and it would make decay its guarantee.
We advise you to wash the product with cold water and neutral soap
without bathing the contacts, be assured that the batteries are not
connected during the washing.
In case of malfunction to check that:
- The connections of the wirings are connected and well inserted
- The 12V battery is completely loaded
- the contacts are entire and are not oxidized (use aan nti- oxiding
product)
- the fuse is entire, in case of multilink make sure to have replaced
the fuse according to the necessities of consumption.
- In case of return to a single configuration from a multilink one remember
to replace the fuse with the original one.
- The regulator is electronically managed, assure to have your battery
and alternator in correct state of operation.
In case the product shouldn’t work after these controls address You
to the nearest retailer
Klan S. r. l. declines any responsibilities in case of accident caused
by a bad knowledge of the product and above all from the use of it.
IN THE CASE IN WHICH THE ABOVE DESCRIBED INSTRUCTIONS ARE NOT FOLLOWED
THE KLAN S. R. L. WON’T BE RESPONSIBLE FOR ANY POSSIBLE DAMAGES AND
THE GUARANTEE WILL BE VOID.
